Hongsheng 3030RGB Full-color LED Chips with High Power High CRI SMD Six-pin 3030 Light Emitting Diode Manufacturer

Matters Needing Attention:

1. Overcurrent protection customers must use resistance to protect, otherwise the drift of the voltage will cause a large change in the current (occurrence of breakdown phenomenon). When the lamp chip is used, the current must be within the specified range to avoid the bad caused by excessive current.

2. Store

2-1. Do not open the moisture-proof bag before preparing to use the 3030 led chips. Before opening, please check the packing bag for air leakage, after opening the bag, check the humidity mark card 20% rh whether the mark area from blue to pink. Please contact the manufacturer or return to the manufacturer for high temperature dehumidification ,(high temperature dehumidification environment :120 degrees ,6 h) do not handle

2-2. Before opening the package, leds should store temperature less than 30℃, humidity less than 70% rh.. 

2-3. When the package is opened, the temperature is below 30℃ and the humidity is below 60% rh, and the opening-to-weld finish is controlled at 4 h..

2-4. When the hygroscopic material (silica gel) has subsided or the leds has exceeded the storage time, baking treatment is required based on the following conditions :60±5℃/24 hours.