Hongsheng 7W Rrcessed Indoor Grille Linear Wall Washer Spot Light CRI＞80 Aluminum Material with High Quality Factory Wholesale
Grille linear luminaire for indoor installation on a ceilling, length 96mm. Phospho-chromatised and polyester powder coated extruded copper-free aluminium body, clear cover, moulded silicone gasket and stainless steel screws. Built-in LED driver AC200~240V/AC100~240V 50-60Hz, with 3535 LED chip. 3000K/4000K/5000K/6000K optional.
Product Model: HS-GS7W-03T
Cover: Clear
Power: 7W
LED Chip: 3535
CRI: Ra80
Material: Aluminum
Beam Angle: 15°/24°/38°
| Product Model | HS-GS7W-03T | Beam Angle(°) | 15°/24°/38° |
| Cover | Clear Cover | Lamp Body Material | Aluminum |
| Driver | Isolate | Lamp Luminous Efficiency(lm/w) | ＞125 |
| Driver Input Voltage | AC200~240V/AC100~240V | Warranty | 3 Years |
| Power | 7W | Driver Certificate | CE/TUV/UL/SAA/FCC |
| Driver Input Frequency | 50~60Hz | Working Temperature | Minus 20--60°C |
| Power Factor | >0.95 | Dimension(mm) | L96*W46*H52 |
| SMD | 3535 | Hole Size（mm） | L88*W35 |
| Lamp Luminous Flux(lm) | 875 | Color Rendering Index(Ra) | ＞80 |
| Color Temperature(CCT) | 3000K/4000K/5000K/6000K | LED Work Currency | 170mA |
Deep tube anti-glare: Built-in anti-glare design of light source
Highlight LED light source: With "core" good lamp; CRI＞80; highly restore the original color of the object
3000K/4000K/5000K/6000K CCT optional: Choose according to the demand, so that the lamps are more practical
Heat dissipation design: No fault light attenuation, stable constant current
Small lamp body, big role: Save space, not restricted, make lamps more practical
High Quality bright wick: Bright soft light source, no stroboscopic, no glare
High quality clasp: Spring buckle, safe hands, durable and convenient installation
High quality aluminum: Thickened aluminum efficient heat dissipation, reduce light source decay, stable and durable, prolong life
Installation Mode
1. Use approprite tools to cut holes in the ceiling according to the corresponding size of the lamp;
2. Connect the reserved conductor to the connecting end of the lamp;
3. Put the spring buckle at the both ends of the product vertically into the hole;
4. Put the spring buckel on the both sides of the product, you can turn on the power for use.
Shenzhen Hongsheng Optoelectronics Co., Ltd.
